Product ID:CERAMIC PERMANENT MAGNET, ARNOX 1
MSDS Date:05/28/1992
FSC:9650
NIIN:00N053338
MSDS Number: BVQRF

ARNOLD ENGINEERING CO

300 N WEST ST
MARENGO, IL 60152
US

Emergency Phone: 815-568-2000

Info Phone: 815-568-2000

Preparer: ROBERT LIPPE

Cage: 95566

ARNOLD ENGINEERING CO DIV OF SPS TECHNOLOGIES

G MARENGO, IL 60152 US

Telephone: 815-568-2000

Cage: 95566

STRONTIUM OXIDE; (STRONTIUM)

CAS: 1314-11-0

Fraction By Weight: 8-10%

OSHA PEL N/K

ACGIH TLV: N/K

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 10-30%

OSHA PEL 15 MG/M3 DUST;5 FUME

ACGIH TLV: 10 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 1-1.5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT PRESENTS NO HEALTH HAZARD
UNLESS IT IS CUT OR MACHINED. THESE PROCEDURES MAY PRODUCE
HAZARDOUS AMOUNTS OF DUST. SUCH OPERATIONS SHOULD BE EVALUATED TO
DETERMINE IF A HAZARD EXISTS. ANY LO NG-TERM EXPOSURE TO DUSTS
EXCEEDING TLVMAY RESULT IN IRRITATION TO UPPER RESPIRATORY TRACT.
DUSTS IN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:EYES MAY CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYE:FLUSH W/WATER FOR AT LEAST 15 MI
NUTES.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . PRODUCT IS NOT COMBUSTIBLE.
Unusual Fire/Explosion Hazard:PRODUCT IS NOT COMBUSTIBLE. FINE POWDERS
PRODUCED BY DRY ABRASIVE GRINDING OR MACHINING MAY CAUSE EXPLOSION
HAZARD.

Spill Release Procedures:DUSTS OF FINE SCRAP MAY BE VACUUMED OR SWEPT
WET TO KEEP AIRBORNE DUST CONCENTRATIONS TO A MINIMUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID INGESTION OF DUSTS BY NOT
EATING, DRINKING OR SMOKING IN AREAS WHERE DUSTS ARE GENERATED.
MAGNETS ARE BRITTLE & MAY FRACTURE OR CHIP.
Other Precautions:PARTS THAT ARE MAGNETIZED MAY CREATE A PERSONAL
HAZARD DUE TO CHIPPING, SHATTERING OR PINCHING ON IMPACT. USE GOOD
MANUFACTURING PRACTICES & GOOD HOUSEKEEPING PRACTICES THAT WILL
KEEP GENERATED DUSTS TO A MINIMUM.

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK WHEN DRY
GRINDING OR CUTTING MATERIALS.
Ventilation:CONTROL DUST LEVELS BY UTILIZING WET PROCESS METHODS, GOOD
LOCAL EXHAUST SYSTEM & GOOD HOUSEKEEPING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:USE PERSONAL PROTECTION EQUIPMENT WHEN
REQUIRED.
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Spec Gravity:4.5-4.9
Solubility in Water:NOT SOLUBLE
Appearance and Odor:METALLIC DARK GRAY; NO ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.